Ink Supply Systems

Available as a complete system with our 8000+ printheads and VIAjet™ V-Series product lines, our ink supply systems are designed to reliably deliver our ink formulations and cleaners to ensure optimal performance.

Contact Us
ACIS

ACIS

The robust design of the ACIS (Agitating & Circulating Ink System) significantly reduces the time required to clean and maintain equipment. The printer utilizes a fast dry, HAPS free, curable, white pigmented ink, which will not transfer in the mold, leaving no shadow of the previous mark and no adverse effect on the finished product. Print and record real time information, such as shift codes, time, and date for traceability, as well as barcodes and 2D codes.

+  Reduces down time between recipe changes
+  Eliminates damage to the rubber
+  Operating temperature: 41˚ F – 113˚ F (5˚ C – 45˚ C)
+  Ink reservoir capacity: 4 liter (135.26 oz.)

Low Pressure Module

Low Pressure Module

Designed for the 8000+ series printheads

+  7.80”L x 7.64”W x 9.84”H (198 x 194 x 250 mm)
+  Two liter capacity: ink and cleaner
+  Drives up to 64 valves
+  Optional low level ink warning (High-Pressure Module only)

High Pressure Module

High Pressure Module

Designed for the 8000+ series printheads and the standard series printheads, this ink systems includes advanced auto-ranging and auto-frequency for ease-of-use.

+  Standard model: 1.30”L x 9.84”W x 16.54”H (287 x 250 x 420 mm)
+  Advanced model: 8“L x 12”W x 8.6”H (203.2 x 304.8 x 218.44 mm)
+  Two liter capacity, ink and cleaner
+  Drives up to 64 valves
+  Low level ink warning indicator, with optional low level ink warning beacon
+  Output for low level warning

LCIS

LCIS

Safer operation, no pressurized containers.

+  Low level ink warning signal
+  Ink replacement while printers are in operation
+  Available for 275 gallon totes

Flow-Jet

Flow-Jet

Our pigmented ink supply system designed for the 8000+ printheads provides high-contrast, permanent marks required in the plastics, rubber, steel, wood and building products industries. Its unique re-circulating “through-the-head” system assures reliability with minimal printhead maintenance.  A special diverting system permits continuous production, eliminating the need to stop during ink changeovers.

+  Cabinet: 6”L x 13”W x 23”H (152 x 330 x 521 mm)
+  35.5” (851 mm) high with a warning light
+  Drives up to four printheads

Fluid Pump System (FPS)

Fluid Pump System (FPS)

No factory air is needed, eliminating the problem of oil and water system contamination.
+  15.39”L x 10.82”W x 14.17”H (391 x 275 x 360 mm)
+  Low level ink alarm provides warning
+  Refillable without halting production

Support Documents